Linksys Router

jmikalinis · 11-13-2004, 01:52 PM

hey guys i have a linksys router and was wondering how i would unlock all of the ports( for personall reasons) also how i could make the wireless connection a little stronger through settings and stuff. the model number i have is a BEFW11S4 Wireless - B Broadband Router 802.11b 2.4GHz I have 2 systems plugged directly to the router and one hooked up wireless. please help me thank you.

intelliot · 11-13-2004, 02:16 PM

a month ago i would have said "b". now, however, 802.11g is stepping up to the mass market.

jmikalinis · 11-13-2004, 02:20 PM

do you know how i would unlock the ports?

Arisna · 11-14-2004, 04:33 PM

I'm not sure if this is what you're getting at, but try pointing your web browser to "http://192.168.1.1", typing "default" for username and leaving the pass blank (or maybe that should be the other way around <_<), and adjusting port settings from there.

Randy · 11-14-2004, 04:58 PM

The default settings should do you fine. Are you trying to broadcast the signal long distances and getting poor signal strength or what exactly is your problem?

joshg678 · 11-14-2004, 06:49 PM

802.11g

I would buy this because its backwards compatable with 802.11b, so it makes sence, 10 bucks more get the G because it works with both, and its better.

jmikalinis · 11-14-2004, 07:48 PM

It Disconects Every Few Hours Or So Or Sometimes It Just Shuts Off Its Really really Weird.

Stuff2Do · 11-15-2004, 01:37 PM

My Routers IP Address Is

192.168.2.1

It told me in the manual, have you actually read your manual?

ps. stick to G

g=54 MB ps
b=11MB ps

Randy · 11-15-2004, 01:39 PM

Quote:

Originally Posted by Stuff2Do

My Routers IP Address Is

http://192.168.2.1

It told me in the manual, have you actually read your manual?

ps. stick to G

g=54 MB ps
b=11MB ps

thankyou, mister obvious.

jmikalinis: You might want to check in your router config to see about it "shutting off". Does the router itself power down or does it disconnect from the internet, or disable network traffic?

intelliot · 11-15-2004, 04:37 PM

Sometimes the obvious answer is what people are looking for.

View Poll Results: Which would you buy?
802.11b	1	10.00%
802.11g	9	90.00%
Voters: 10. You may not vote on this poll (are you registered and logged in?)

11-13-2004, 01:52 PM	#1 (permalink)
jmikalinis Noogle Join Date: Nov 2004 Location: U.S.A. Posts: 20 Thanks: 0 Thanked 0 Times in 0 Posts	Linksys Router hey guys i have a linksys router and was wondering how i would unlock all of the ports( for personall reasons) also how i could make the wireless connection a little stronger through settings and stuff. the model number i have is a BEFW11S4 Wireless - B Broadband Router 802.11b 2.4GHz I have 2 systems plugged directly to the router and one hooked up wireless. please help me thank you.

11-13-2004, 02:20 PM	#3 (permalink)
jmikalinis Noogle Join Date: Nov 2004 Location: U.S.A. Posts: 20 Thanks: 0 Thanked 0 Times in 0 Posts	Unlocking? do you know how i would unlock the ports?

11-14-2004, 07:48 PM	#7 (permalink)
jmikalinis Noogle Join Date: Nov 2004 Location: U.S.A. Posts: 20 Thanks: 0 Thanked 0 Times in 0 Posts	Wireless It Disconects Every Few Hours Or So Or Sometimes It Just Shuts Off Its Really really Weird.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-13-2004, 02:16 PM	#2 (permalink)
intelliot Google Guru Join Date: May 2004 Posts: 2,527 Thanks: 15 Thanked 49 Times in 28 Posts	a month ago i would have said "b". now, however, 802.11g is stepping up to the mass market.

11-14-2004, 04:33 PM	#4 (permalink)
Arisna Senior Googler Join Date: Jun 2004 Posts: 125 Thanks: 0 Thanked 0 Times in 0 Posts	I'm not sure if this is what you're getting at, but try pointing your web browser to "http://192.168.1.1", typing "default" for username and leaving the pass blank (or maybe that should be the other way around <_<), and adjusting port settings from there.

11-14-2004, 04:58 PM	#5 (permalink)
Randy Google Guru Join Date: Jun 2004 Posts: 2,133 Thanks: 0 Thanked 1 Time in 1 Post	The default settings should do you fine. Are you trying to broadcast the signal long distances and getting poor signal strength or what exactly is your problem?

11-14-2004, 06:49 PM	#6 (permalink)
joshg678 Senior Googler Join Date: Jun 2004 Location: Earth Posts: 199 Thanks: 0 Thanked 0 Times in 0 Posts	802.11g I would buy this because its backwards compatable with 802.11b, so it makes sence, 10 bucks more get the G because it works with both, and its better.

11-15-2004, 01:37 PM	#8 (permalink)
Stuff2Do Elite Googler Join Date: Nov 2004 Location: England, UK Posts: 1,116 Thanks: 0 Thanked 0 Times in 0 Posts	My Routers IP Address Is 192.168.2.1 It told me in the manual, have you actually read your manual? ps. stick to G g=54 MB ps b=11MB ps

11-15-2004, 04:37 PM	#10 (permalink)
intelliot Google Guru Join Date: May 2004 Posts: 2,527 Thanks: 15 Thanked 49 Times in 28 Posts	Sometimes the obvious answer is what people are looking for.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using GDS with multiple users and Linksys WRT54G Router	jjerison	Google Desktop Search Forum	2	02-16-2006 08:23 AM

GoogleCommunity Sponsor
Use coupon "forum" for 50% Off!


Sponsored Links